Audio Setup - Daewoo SD-8100 Owner's Manual

DVD-Video(PAL) 02.3.15 5:45 PM ˘ ` 61

AUDIO Setup

A user may select audio menu according to a user's speaker set.
Before setting it, you should change status into DVD by pressing [DVD] button on the
remote control.
1
While DISC STOP or Resume STOP, press [SETUP/ENTER] button.
2
Select a digital output.
Set output conditions to coaxial or optical terminal.
You can set following three(3)
values of digital output;
• BITSTREAM: The same signal as audio signal
recorded in disc goes to digital audio output
terminal.
• PCM: Decoded audio signal goes to digital
output terminal.
• OFF: Not any output goes to digital audio output
terminal.
3
Select Dual Mono.
Dual Mono means 2 individual mono channels.
Dual Mono is mainly used to apply 2
different languages to one program. This function
is similar to multichannel sound
function supported in TV or VCR. 2 mono channels
can be combined into total 4 values;
Stereo, L- Mono, R- Mono and Mixed Mono.
• Stereo: outputs left channel and right channel to left speaker and right speaker
respectively.
• L- Mono: outputs left channel to left speaker and right speaker.
• R-Mono: outputs right channel to left speaker and right speaker.
• Mixed Mono: mixes 2 mono channels and outputs the mixed channel to left
and right speaker at the same time.
Language
Video Audio Others
Digital Out Bitstream Bitstream
Dual Mono Stereo PCM
Dynamic Range Off Off
Move Select Exit : Setup/Return
Language
Video Audio Others
Digital Out Bitstream
Dual Mono Stereo Stereo
Dynamic Range Off L-Mono
R-Mono
Mixed Mono
Move Select Exit : Setup/Return
61