Setting Time And Date / Osd (On Screen Display) On & Off - Daewoo SD-8100 Owner's Manual

DVD-Video(PAL) 02.3.15 5:44 PM ˘ ` 25
Setting time and date / OSD ON & OFF
Setting time and date
OSD(On Screen Display) ON & OFF
This player is set to "OSD (On Screen Display) ON" mode before shipping and you can change it to OFF mode.
Press [VCR] button on the remote control to change into VCR Mode and follow the
procedure below.
1
Call the player's "MAIN SETUP",
choose "VCR SETUP", then "CLOCK SET".
2
Move to the position you want to change and type
in the new values.
Wait a few seconds after typing a one-digit number.
Store with [OK] button and exit with [SETUP]
button.
1
Call the player's "MAIN SETUP".
2
Choose "VCR SETUP".
And press the [OK] button.
3
Select "OSD ON/OFF".
If you want OSD OFF mode, select it and press
[OK] button to confirm.
Then OSD characters are not displayed in the
normal picture.
CLOCK SET
TIME - - : - -
DATE - - / - - /- - - -
0-9:SETUP (HOUR)
</>:CORRECT SETUP:END
CLOCK SET
TIME 06:05
DATE 10/03/2002(SUN)
0-9:SETUP (HOUR)
</>:CORRECT
OK:CONFIRM SETUP:END
SETUP
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM SETUP:END
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
PR+/-:SELECT
OK:CONFIRM SETUP:END
OSD ON/OFF
ON
OFF
PR+/-:SELECT
OK:CONFIRM SETUP:END
25