Video Setup - Daewoo SD-8100 Owner's Manual

DVD-Video(PAL) 02.3.15 5:45 PM ˘ ` 60

VIDEO Setup

A user can set up a connected TV condition and screen.
60
Before setting it, you should change status into DVD by pressing [DVD] button on the
remote control.
1
While DISC STOP or Resume STOP, press [SETUP/ENTER] button.
2
Selecting TV Aspect.
If a user selects "4:3 PS", the user can watch only a
center of the original scene of "16:9".
If a user selects "4:3 LB", the user can watch the
original scene of "16:9", but the top and bottom of
the screen look black color.
If a disc size is originally recorded in 4:3, a user
cannot watch it in a wide screen though a user sets a
size as "16:9 Wide".
3
Selecting a TV type.
A user may select a TV type.
A user may select a type among NTSC, PAL or
AUTO.
4
Selecting a VIDEO OUTPUT.
A user may select a VIDEO OUTPUT between RGB
and S-Video.
5
Selecting a bright degree.
A user may select a bright degree of a screen. There
are two choices of Normal and Bright.
6
Selecting a vivid degree.
A user may select a vivid degree of a screen. There
are three of choices, Normal, Soft and Sharp.
Language
Video Audio Others
TV Aspect 4:3 PS 4:3 PS
TV Type PAL 4:3 LB
Video Out S-Video 16:9 Wide
Brightness Normal
Sharpness Normal
Move Select Exit : Setup/Return
Language
Video Audio Others
TV Aspect 4:3 PS
TV Type PAL
Auto
Video Out S-Video
NTSC
Brightness Normal
PAL
Sharpness Normal
Move Select Exit : Setup/Return
Language
Video Audio Others
TV Aspect 4:3 PS
TV Type PAL
Video Out S-Video RGB
Brightness Normal S-Video
Sharpness Normal
Move Select Exit : Setup/Return
Language
Video Audio Others
TV Aspect 4:3 PS
TV Type PAL
Video Out S-Video
Brightness Normal Normal
Sharpness Normal Bright
Move Select Exit : Setup/Return
Language
Video Audio Others
TV Aspect 4:3 PS
TV Type PAL
Video Out S-Video
Brightness Normal Normal
Sharpness Normal Soft
Sharp
Move Select Exit : Setup/Return