Tape - Recording; Recording Your Favorite Cd Tracks On A Tape; Cd-Tape Synchro Recording - Sony MHC-RV990D Operating Instructions Manual

Searching for the beginning of
the current or the next track
(AMS)*
To go forward
Press > during playback when H lights.
"TAPE A (or TAPE B) >>> +1" appears.
Press . during playback when h lights.
"TAPE A (or TAPE B) <<< +1" appears.
To go back
Press . during playback when H lights.
"TAPE A (or TAPE B) <<< –1" appears.
Press > during playback when h lights.
"TAPE A (or TAPE B) >>> –1" appears.
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under the
following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the system is placed near a television.
Tip
When a tape is inserted, corresponding forward/
reverse indicators light.
Tape – Recording
Recording your favorite
CD tracks on a tape

— CD-TAPE Synchro Recording

You can record a whole CD on a tape.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
1
Load a recordable tape into deck B.
2
Press DVD and load a disc you want to
record.
3
Press CD SYNC on the unit.
Deck B stands by for recording.
"REC" flashes.
4
Press DIRECTION on the unit
repeatedly to select "g" to record on
one side. Select "j" (or "RELAY") to
record on both sides.
5
Press REC PAUSE/START on the unit.
Recording starts.
To stop recording
Press x.
To record a disc by specifying
track order
You can record only your favorite CD tracks
using Program Play. Between steps 2 and 3,
perform steps 2 to 6 of "Creating your own
program" (page 21).
Notes
• CD Synchro Recording is not available with DVDs
and JPEG files.
• You cannot listen to other sources while recording.
• When you press CD SYNC in step 3, the surround
effect may automatically change (see "Selecting the
surround effect" on page 46).
GB
43