Restricting Disc Playback; Custom Parental Control/Parental Control - Sony MHC-RV990D Operating Instructions Manual

To force the system to switch to
interlace when PROGRESSIVE is
selected (on the unit only)
Make sure the function is set to DVD, then hold
down and press DVD MENU.
x
Notes
• "PROGRESSIVE" does not work for PAL signals.
Even if you set "COMPONENT OUT" to
"PROGRESSIVE", the output signal is
automatically switched to interlace format for PAL
signals.
• When "COMPONENT OUT" is set to
"PROGRESSIVE", no video signal is output from
the VIDEO OUT or S VIDEO OUT jacks.
x VCD COLOR SYSTEM (except for Latin
American model)
Select the color system when you play a VIDEO
CD.
AUTO Outputs the video signal in the
system of the disc, either PAL or
NTSC. If your TV uses a DUAL
system, select AUTO.
PAL Changes the video signal of an
NTSC disc and outputs it in the
PAL system.
NTSC Changes the video signal of a PAL
disc and outputs it in the NTSC
system.
Notes
• You cannot change the color system of the disc itself.
• Except for Latin American model, you can change
the color system of this unit according to the
connected TV (page 10).

Restricting disc playback

— CUSTOM PARENTAL CONTROL/
PARENTAL CONTROL
Preventing playback of
specific discs
— CUSTOM PARENTAL CONTROL
You can set the playback restrictions so that the
system will not play inappropriate discs. You
can set the same Custom Parental Control
password for up to 25 discs. When you set the
twenty-sixth disc, the playback restriction for
the first disc is canceled.
1
Insert the disc you want to lock.
If the disc is playing, press x to stop play.
2
Press DVD DISPLAY in stop mode.
The Control Menu appears.
3
Press M or m repeatedly to select
"CUSTOM PARENTAL CONTROL",
then press ENTER.
The "CUSTOM PARENTAL CONTROL"
is selected.
4
Press M or m repeatedly to select
"ONt", then press ENTER.
x If you have not entered a password
The display for registering a new password
appears.
CUSTOM PARENTAL CONTROL
Enter a new 4-digit password,
.
then press
ENTER
– – –
Enter a 4-digit password using the number
buttons on the remote, then press ENTER.
The display for confirming the password
appears.
continued
GB
31