Hard drive
Description
Hard drives
1 TB, 5400 rpm, 7 mm
750 GB, 5400 rpm, 7 mm
500 GB, 5400 rpm, 7 mm
500 GB, 5400 rpm, 7 mm, hybrid (8-GB SSD)
500 GB, 7200 rpm, 7 mm
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the service door (see
To remove a hard drive:
1.
Remove the 4 Phillips PM2.5×5.0 screws (1) that secure the hard drive to the chassis.
2.
Pull the plastic tab to slide the hard drive (2) away from the center of the computer to disengage it from
the connector.
Battery on page
33).
Service door on page
34).
Component replacement procedures
Spare part number
762990-001
752099-001
778186-001
732000-001
703267-001
35