Table of Contents
Advertisement
13.
Remove the display hinges from the display enclosure (2).
Display hinges are available in the Display Hinge Kit using spare part number 826384-001.
14.
If it is necessary to replace the display/webcam cable, remove the cable from the clips on the display
enclosure (1), and then lift the cable straight up and off the display panel (2).
The display/webcam cable is available in the Cable Kit using spare part number 826373-001.
Reverse this procedure to reassemble and install the display assembly.
76
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
- Quick Links:
- Hard Drive
- Keyboard
Hide quick links:
Advertisement
Table of Contents
