Setup - Device Mode - Nadatel UH-0413L User Manual

3-4. Setup – Device Mode
In the SETUP menu, select the DEVICE tab. Then, the device menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control.
Item
ALARM OUT
/ALARM DURATION
CONTROLLER & PTZ
SPOT OUT
CHANNEL
MOTION ZONE Select either Full Zone or Partial Zone for motion detection.
MOTION SENSITIVITY Set the motion sensitivity for the selected channel.
Figure 3.4.1. Device mode setup screen
Table 3.4.1. Menu items in Device Setup screen
Only one Alarm-out is available.
Set alarm dwell time from 5 to 60 seconds or infinite.
Set the controller and PTZ camera speed, number, type and ID.
Set the all details for spot monitoring. Lower port is for Spot out.
Select specified channel for motion zone setup.
Control the motion sensitivity from 1 to 9.
Description
24