Upgrading Firmware - Nadatel UH-0413L User Manual

7. Upgrading Firmware

In order to upgrade, the firmware upgrade file must first be downloaded and copied into the USB memory
drive. Create a new folder in the USB memory drive and name it "upgrade". Copy the firmware upgrade file
"xxxxxx.bin" into the "upgrade" folder.
NOTICE
A format of the USB Drive has to be set to FAT32.
The folder on the USB memory drive must be named "upgrade".
After the firmware upgrade file is copied into the USB memory drive, connect the USB memory
drive to the USB port on the front or rear panel and do the followings:
1. Go to CONFIG menu of Setup.
2. You can see the following message when pressing the software upgrade menu after putting the USB
memory drive on the system.
56