Spot Out - Nadatel UH-0413L User Manual

Controller (Keyboard Controller): If a PTZ controller is used, select a controller protocol from Controller
menu. Set SPEED (Baud Rate) and ID number.

3-4-2. SPOT OUT

Item
SPOT OUT
SPOT TYPE Select Full screen or Quad screen mode.
SPOT ON EVENT Enable/Disable display of the channel when an event is active.
SPOT EVENT
DWELL TIME
SEQUENCE Enable/disable sequential display of spot channel in full screen.
SEQ-DWEL TIME Set the dwell time for the spot channel display.(3-10sec)
SPOT CHANNEL Select a channel for spot monitoring using the mouse or the control
Figure 3.4.1.2. Controller Selection Screen
Figure 3.4.2.1. SPOT OUT setup Screen
Table 3.4.2.1. Menu item in SPOT-OUT Setup screen
Spot Out 1: from 1 channel to 4 channel
Set the dwell time for the display of the event activated channel.
(3-10sec)
If select ON, spot channel selection screen is displayed.
◀ ▲ ▶ ▼
button (
Description
) on the remote control and press OK button.
26