Multitech MultiModem ZBA MT9234ZBA User Manual page 10

Chapter 2 – Installation
Click on the next button to start the driver pre-installation.
4.
You will be prompted confirm the installation of the driver. Click the Install button to continue.
5.
There will be a transitory screen, then the process will complete. Click on the Finish button.
6.
Connect your modem to an available serial port.
7.
Your driver installation is complete. You can now reboot your computer and Windows should detect the modem and
8.
install it.
a.
b.
10
Downloaded from Elcodis.com electronic components distributor
Older versions of Windows may start the installation wizard – if this happens, please refer to the install
section that applies to your specific version of windows.
Some configurations will require that the power be cycled on the modem before it will communicate through
the COM port. If you are unable to access the modem after installation, turn the modem power off and then
on again and it should communicate correctly.
Multi-Tech Systems, Inc. MT9234ZBA-Series User Guide (S000387D)