Supermicro superserver 2028TP-VRL Serie User Manual page 23

4. The field in brown is required if the "logging" field is set to "SYSLOG" (i.e. "logging":
"SYSLOG"). Up to two IP addresses (or FQDNs) are supported in this field. If the
field is set to ("logging": "LOGINSIGHT"), the field in brown, must be left blank
(i.e."syslogServerCSV": "")
5. Fields in yellow are required if the "logging" field is set to "LOGINSIGHT" (i.e. "logging":
"LOGINSIGHT"). If the field is set to ("logging": " SYSLOG"), the fields in yellow, must
be left blank (i.e. "loginsightServer": "" and "loginsightHostname": "")
6. Fields that contain passwords should only be filled out by a customer during
configuration. They should not be pre-filled in the JSON file for security reasons.
7. No other fields should be modified.
The following is a sample JSON file based on EVO:RAIL Release 1.1.0 and 1.2.0. Data is
mapped to the rows in the EVO:RAIL Network Configuration Table.
23
Chapter 1: Introduction