Using Louvre - Mitsubishi Electric MJ-E152AF-H Instruction Manual

Using Louvre

The louvre can be made to swing. Select from the 5 possible settings to suit the purpose.
Remove the plug from the power socket and
connect again, automatic louvre stops.
The level of noise emitted from the unit varies depending on the air-blowing direction.
To locate the position, the air outlet may stop up to 8 seconds and then start operating again.
If the louvre is touched by hand or object, the louvre angle will change, so readjust the louvre by pressing the direction switch.
If air is blown directly onto a wall, the wall may become dirty because of dust in the air.
Blip
Louvre stops in a vertical position, and louvre display screen
will disappear.
The louvre is adjusted in the air-
blowing direction, so do not close the
louvre.
The louvre has a variety of angles, so there may be a small
amount of air coming from the downward outlet.
60° 60°
30° 30°
The louvre moves slowly through the last The louvre moves slowly through the last
30°of the swing, as it takes shorter time to 30°of the swing, as it takes shorter time to
traverse the upward arc than the rear arc traverse the upward arc than the rear arc
when louvre moves at a constant speed. when louvre moves at a constant speed.
Adjust the louvre
direction by hand.