Mitsubishi Electric MJ-E152AF-H Instruction Manual page 15

HIGH • LOW • EASY
2
1
2
Humidity cannot be set when operating in
HIGH, LOW and EASY mode. To set the
humidity, change to the AUTO mode.
1
Blip
Blip Blip
Blip Blip
Blip Blip
Blip Blip
Blip Blip
Blip Blip
Blip
The blower operates continuously in HIGH airflow
mode.
It is recommended for strong dehumidification.
The blower operates continuously in LOW airflow
mode.
It is recommended when you want to dehumidify
with lower blower sounds.
To relieve the discomfort from dampness, the
unit operates intermittently after the automatic
switching of airflow rate. Blowing air is used to
control the room temperature rise if the room
temperature is high.
It is recommended when you want to maintain the
comfortable level of humidity.
If the set humidity level is reached, sometimes
the blower/louvre will stop operating.
If the room temperature
If the room temperature is above 27°C,
is below 27°C, the the unit will stop dehumidification if
the humidity level is below 50% but
unit will dehumidify
the blower will work. The unit restarts
according to the room
when humidity rises to 60%.
temperature.