Displaying And Setting The Water Hardness Level - Miele G 6160 Operating Instructions Manual

Displaying and setting the water
hardness level
 Turn the dishwasher off with the 
button, if it is turned on.
 Press the program selection button
, and, simultaneously switch the
dishwasher on using the  button.
Keep the program selection button 
pressed in for at least four seconds
until the lower right program indicator
light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
 Press the  button twice.
The  indicator light will flash twice at
short intervals.
Before using for the first time
The value which has been set for the
water hardness appears as a figure in
the time display (see table) according to
.
  will start flashing in the time display.
This is the factory default setting of 1°.
 Use the program selection button 
to select the value which equates to
your water hardness level.
Each press of the button moves you
up a level. When the highest water
hardness level is reached, the setting
starts from the beginning again.
The setting is now stored in memory.
 Turn the dishwasher off with the 
button.
19