Water Intake Fault - Miele G 6160 Operating Instructions Manual

Frequently Asked Questions

Water intake fault

Problem
The Optical Interface is
flashing quickly.
The buzzer is sounding.
The Intake/Drain indica‐
tor light is flashing on
and off.
The Optical Interface is
flashing quickly.
The buzzer is sounding.
The Intake/Drain indica‐
tor light is flashing and
fault code  or  has
appeared in the display.
60
Possible cause and solution
The water supply is turned off.
 Turn on the water supply all the way.
Before fixing the fault:
 Turn the dishwasher off with the  button.
There is a problem with the water intake.
 Turn on the water supply fully and start the pro‐
gram again.
 Clean the water intake filter (see "Frequently asked
questions").
 The water pressure at the intake is lower than 4.35
psi.
Contact a plumber.