Expanding Storage - HP StoreOnce 2700 Installation And Configuration Manual

Login to the StoreOnce GUI as Admin.
Copy <LTU>.DAT to repository.
3. Verify the LTU is stored within the repository using StoreOnce CLI command: system show
repository.
Look for the <LTU>.DAT file.
4. Apply the license using one of the following StoreOnce CLI commands:
license load <LTU>.DAT to load a license that has been saved as a file image. The
file image must exist in the Backup system's repository directory.
NOTE:
load "<LTU>.DAT". Here is an example of license file name that contains spaces: HP
StoreOnce 60_23702636.DAT. The command to load this file would be:
license load "HP StoreOnce 60_23702636.DAT"
license add <license key string> to key in the license directly. If you used
email or a temporary file, copy and paste the string exactly as obtained from the HP
Licensing website. It is not advised to key in the LTU manually.
NOTE:
5. To ensure that the license was applied successfully, run the StoreOnce CLI command:
license show

Expanding storage

NOTE: For a more detailed description of this process refer to the HP StoreOnce Backup system
Capacity Upgrade guide supplied with the expansion kit.
IMPORTANT:
because the StoreOnce Backup is delivered with the storage already expanded.
Be sure to apply the licenses for all kits before running the expansion process. All Upgrade Kits
that have been licensed are included in the expansion process.
1. Open the puTTy (or other ssh) application and login to the StoreOnce CLI as an Admin user.
2. Scan for the newly attached storage and create a new Logical Unit (LUN) on this storage using
the StoreOnce CLI command:
hardware discover storage
3. Monitor the status of the LUN creation process using the StoreOnce CLI command:
system show status
The following output is an example of the two commands; the values shown may not match
your appliance specific values.
# hardware discover storage
This command takes several minutes to complete execution.
storage discovery successfully completed
# system show status
Status
------
Formatted 15,070.76GB, Discovered 20,932.81GB to be added
62 Completing the installation
If the license file contains a space in its name, the command should be license
The key is specific to the HP StoreOnce Backup system. It cannot be transferred.
HP 4700 Backup systems only: Do not follow this process for the first storage shelf