Cannot Access A Storage Shelf - HP StoreOnce 2700 Installation And Configuration Manual

Figure 38 NAS shares and IPv6

Cannot access a storage shelf

Always power up with all storage shelves that have been configured attached. If a shelf is not
connected, none of the storage will start. In this case, power off, reconnect the storage and reboot.
Do not attempt to reconfigure the storage using the StoreOnce Management console.
If you disconnect a storage shelf, you must reconnect it to the same RAID controller to which it was
originally connected.
Contact HP Support if you have ongoing problems accessing storage shelves.
Cannot access a storage shelf 1 13