Expansion Shelves; Gbit Ethernet Port Leds; 10 Gbit Ethernet Card Leds - HP StoreOnce 2700 Installation And Configuration Manual

Expansion shelves

The hot-plug drives in expansion shelves have two LEDs.
Figure 35 Drive LEDs (expansion shelves)
1. Disk Online LED
2. Disk beacon LED

1 Gbit ethernet port LEDs

The 1 Gbit ethernet LAN ports have two LEDs, as illustrated on the rear of an HP StoreOnce Backup
system below.
Figure 36 1 Gbit ethernet LAN port LEDs (example shows HP StoreOnce 4500 Backup)
1. LAN network speed LED indicator
2. LAN activity status LED indicator

10 Gbit ethernet card LEDs

Each 10 Gbit ethernet card has two LEDs, as illustrated below.
Steady green: Online, no activity
Flashing green: Ongoing disk activity
Steady amber: Disk has failed
Flashing amber: Predictive disk failure
Off: The disk is not a part of RAID
Steady blue: identifies a specific disk within the unit. The LED can be beaconed on and
off from the StoreOnce Management Console.
Steady green: The LAN connection is using 10 Mbps/100
Mbps link.
Steady amber: The LAN connection is using a 1 Gbit
ethernet link.
Off: No connection.
Flashing green: Ongoing network data activity.
Off: No network data activity or no connection.
1 Gbit ethernet port LEDs 107