Capacity Upgrade Kit Leds - HP StoreOnce 2700 Installation And Configuration Manual

Capacity upgrade kit LEDs

NOTE: One expansion shelf must be installed with the HP StoreOnce 4700 Backup system. This
is the same unit as the Capacity Upgrade Kit and the LEDs are as described in this section.
There are three LEDs on the front of the Capacity Upgrade Kit.
Figure 30 Capacity Upgrade LEDs
1. Health LED
2. Fault LED
3. UID button/LED
102 Understanding LEDs
Green: system activity
Off: No system activity
Amber: Fault condition
Off: No fault condition
Blue: Identified
Flashing blue: Active remote management
Off: No remote management