Table of Contents
Advertisement
Prestige 681 SDSL Router
Field
Description
Filter #
This is the filter set, filter rule co-ordinates, i.e., 2,3 refers to the second
filter set and the third filter rule of that set.
Filter Type
Use the [SPACE BAR] to toggle between types of rules. Parameters
displayed below each type will be different.
Active
Select Yes to turn on the filter rule.
Offset
Enter the starting byte of the data portion in the packet that you wish to
compare. The range for this field is from 0 to 255.
Length
Enter the byte count of the data portion in the packet that you wish to
compare. The range for this field is 0 to 8.
Mask
Enter the mask (in Hexadecimal) to apply to the data portion before
comparison.
Value
Enter the value (in Hexadecimal) to compare with the data portion.
More
If yes, a matching packet is passed to the next filter rule before an action is
taken; else the packet is disposed of according to the action fields.
If More is Yes, then Action Matched and Action Not Matched will be N/A.
Log
Select the logging option from the following:
l
None – No packets will be logged.
l
Action Matched - Only packets that match the rule parameters will
be logged.
l
Action Not Matched - Only packets that do not match the rule
parameters will be logged.
l
Both – All packets will be logged.
Select the action for a matching packet.
Action
Matched
Action Not
Select the action for a packet not matching the rule.
Matched
Once you have completed filling in Menu 21.1.2 - generic Filter Rule, press [ENTER] at the message
[Press ENTER to Confirm] to save your configuration, or press [Esc] to cancel. This data will now be
displayed on Menu 21.1 - Filter Rules Summary.
9-12
Table 9-6
Generic Filter Rule Menu Fields
Option
Generic Filter
Rule/ TCP/IP
Filter Rule
Yes/No
Default = 0
Default = 0
Yes / N/A
None
Action
Matched
Action Not
Matched
Both
Check Next
Rule
Forward
Drop
Check Next
Rule
Forward
Drop
Filter Configuration
Advertisement
Table of Contents
