Table of Contents
Advertisement
Prestige 681 SDSL Router
7.4.1 IPX Remote Node Setup
Follow the procedure in Chapter 5: to configure the protocol-independent parameters in Menu 11.1 -
Remote Node Profile. For the IPX-specific parameters in Menu 11.3 - Remote Node Network Layer
Options follow the instructions below.
Step 1.
In Menu 11.1, make sure IPX is among the protocols in the Route field. (The Route field should
display Route = IPX or Route = IP + IPX.)
Step 2.
Move the cursor to the Edit IP/IPX/Bridge field, then press the [SPACE BAR] to toggle this
field to Yes and press [ENTER] to open Menu 11.3 - Network Layer Options.
Frame Relay Parameters :
DLCI= 16
IP Options:
Rem IP Addr: N/A
Rem Subnet Mask= N/A
My WAN Addr= N/A
Single User Account= N/A
Metric= N/A
Private= N/A
RIP Direction= N/A
Version= N/A
Figure 7-5
7-6
Menu 11.3 - Remote Node Network Layer Options
Enter here to CONFIRM or ESC to CANCEL:
Menu 11.3 - Remote Node Novell IPX Options
IPX Options:
Rem LAN Net #= 00000000
My WAN Net #= 00000000
Hop Count= 1
Tick Count= 2
Bridge Options:
Ethernet Addr Timeout(min)= N/A
IPX Configuration
Advertisement
Table of Contents
