ZyXEL Communications Prestige 681 User Manual page 94

Sdsl router
Hide thumbs Also See for Prestige 681:
Table of Contents

Advertisement

Prestige 681 SDSL Router
Field
IP Source Route
Destination: IP
Addr
Destination: IP
Mask
Destination: Port #
Destination: Port #
Comp
Source: IP Addr
Source: IP Mask
Source: Port #
Source: Port #
Comp
TCP Estab
More
Log
9-8
Description
UDP is 17 and ICMP is 1. This value must be between 0
and 255
If Yes, the rule applies to packet with IP source route
option; else the packet must not have source route option.
The majority of IP packets do not have source route.
Enter the destination IP Address of the packet you wish to
filter. This field is a don't-care if it is 0.0.0.0.
Enter the IP subnet mask to apply to the Destination: IP
Addr.
Enter the destination port of the packets that you wish to
filter. The range of this field is 0 to 65535. This field is a
don't-care if it is 0.
Select the comparison to apply to the destination port in
the packet against the value given in Destination: Port #.
Enter the source IP Address of the packet you wish to
filter. This field is a don't-care if it is 0.0.0.0.
Enter the IP subnet mask to apply to the Source: IP Addr.
Enter the source port of the packets that you wish to filter.
The range of this field is 0 to 65535. This field is a don't-
care if it is 0.
Select the comparison to apply to the source port in the
packet against the value given in Source: Port #.
This field is applicable only when IP Protocol field is 6,
TCP. If yes, the rule matches only established TCP
connections; else the rule matches all TCP packets.
If yes, a matching packet is passed to the next filter rule
before an action is taken; else the packet is disposed of
according to the action fields.
If More is Yes, then Action Matched and Action Not
Matched will be N/A.
Select the logging option from the following:
l
None – No packets will be logged.
l
Action Matched - Only packets that match the rule
parameters will be logged.
l
Action Not Matched - Only packets that do not
match the rule parameters will be logged.
l
Both – All packets will be logged.
Option
Yes/No
IP address
Subnet mask
0-65535
None/Less/Greater/
Equal/Not Equal
IP Address
IP Mask
0-65535
None/Less/Greater/
Equal/Not Equal
Yes/No
Yes / N/A
None
Action Matched
Action Not Matched
Both
Filter Configuration

Advertisement

Table of Contents
loading

Table of Contents