Brother HL-L9200CDWT User Manual page 81

Hide thumbs Also See for HL-L9200CDWT:
Table of Contents

Advertisement

Driver and Software
Print Quality
Choose one of the following print quality settings:
• Normal
600 dpi class. Recommended for ordinary printing. Use this mode for good print quality with reasonable
print speeds.
• Fine
2400 dpi class. The finest print mode. Use this mode to print precise images such as photographs.
Since the print data is much larger than in Normal mode, processing time, data transfer time, and
printing time will be longer.
NOTE
The print speed will change depending on the print quality setting you choose. Higher print quality takes
longer to print, while lower print quality takes less time to print.
Color / Mono
You can change the Colour/Mono settings in the printer driver as follows:
• Auto
The machine checks the content of the document for colour. If colour is detected anywhere in the
document, it will print the whole of the document using all the colours. In other words, it will mix some
of the toners to help achieve every shade detected in the document, increasing the density of toner
applied to the page. If no colour content is detected, it will print the document in monochrome. The
default setting on your machine is Auto.
• Color
Whether the document contains colour or just monochrome, your machine will print the document using
all the colours.
• Mono
Select this mode if the document has only black and greyscale text and objects. If your document
contains colour, then selecting Mono means it will print the document in 256 levels of grey using only
the black toner.
NOTE
• The machine's colour sensor is very sensitive and may perceive faded black text or an off-white
background as colour. If you know that your document is black and white and you want to conserve colour
toner, select Mono mode.
• If either the Cyan, Magenta or Yellow toner reaches the end of its life while printing a colour document, the
print job cannot be completed. You can cancel your print job and choose to start the print job again in
Mono mode, as long as Black toner is available.
Paper Source
Choose Auto Select, Tray1, Tray2
1
Available if the optional tray is installed.
2
Standard equipment.
1 2
or MP Tray.
2
72

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl-l9300cdwtt

Table of Contents