Brother HL-L9200CDWT User Manual page 22

Printing Methods
c
Load paper in the MP tray, making sure:
 The paper stays under the maximum paper tab (1).
The paper's leading edge (top of paper) is positioned between the

 The side to be printed on must be face up with the leading edge in first.
 The paper guides touch the sides of the paper so it will feed properly.
1
NOTE
When you are using glossy paper, load only one sheet at a time in the MP tray to avoid a paper jam.
d
Lift up the support flap to prevent paper from sliding off the face-down output tray, or remove each page
as soon as it comes out of the machine.
and arrows (2).
2
1
13