Brother HL-L9200CDWT User Manual page 143

Routine Maintenance
Replacing the drum unit
IMPORTANT
• While removing the drum unit, handle it carefully because it may contain toner. If toner scatters on your
hands or clothes, immediately wipe or wash it off with cold water.
• Every time you replace the drum unit, clean the inside of the machine (see Cleaning and Checking the
machine on page 153).
When you replace the drum unit with a new one, follow these steps, and then reset the drum counter by
following the instructions included with the new drum unit.
a
Make sure that the machine is turned on.
b
Press the front cover release button and pull open the front cover.
c
Hold the blue handle of the drum unit. Pull the drum unit out until it stops.
5
5
134