Brother HL-L9200CDWT User Manual page 102

General Information
Level 1 Level 2
Paper Tray Tray Use
Priority
2-sided
MP Size
Tray1 Size
Tray2 Size
Check Size
The factory settings are shown in Bold with an asterisk.
1
When Tray 2 is installed.
2
Tray 2 is standard on HL-L9200CDWT.
Options
Auto* / MP Only / Tray1 Only /
1
Tray2 Only
(Without Tray2 installed)
MP>T1* / T1>MP
(With Tray2 installed)
MP>T1>T2* / MP>T2>T1 /
T1>T2>MP / T2>T1>MP
On(Long Bind) / On(Short
Bind) / Off*
A4* / Letter /B5(JIS) /
B5(ISO) / A5 / A5(Long Edge) /
A6 / Executive / Legal / Folio /
Com-10 / Monarch / C5 / DL /
3"x5"
A4* / Letter /B5(JIS) / A5 /
A5(Long Edge) / A6 /
Executive / Legal / Folio
1 A4* / Letter / B5(JIS) / A5 /
Executive / Legal / Folio
On* / Off
Descriptions
Select the tray that will be used.
When Auto is chosen in Tray Use,
the machine chooses the order in
which it uses the paper trays that
contain paper of the same size.
Select whether to print on both sides
of the paper.
Select the size of paper you are
loading in the MP tray.
Choose the size of paper you loaded
in the standard paper tray.
Choose the size of paper you loaded
in the optional lower tray (Tray 2)
Select whether to display the
message telling you to check that
the size of the paper in the machine
and the machine's Paper Size
setting match.
3
2
.
93