Increasing The Cutting Line Length - Qualcast CLGT1825D Instruction Manual

Operating Instructions & Tips

Increasing the Cutting Line Length

10
•
Before the first cutting, ensure the cutting line is the correct length. If the line is too short, remove the
spool cover by depressing the 2 tabs on either side of the spool housing (fig 10).
•
Gently pull out sufficient line from the spool to ensure it extends a few centimeters past the edge of
the guard,
•
Reload the spool and lock the cover. Ensure it locks back firmly into position (fig 11).
•
During operation to increase the cutting line simply switch the line trimmer off and then on again, this
with restore the line to the correct length. The blade knife on the grass guard ensures the cutting line
is trimmed to the correct length.
11
Customer Helpline 0845 077 8888
13