How To Replace The Spool/Spool Line; Step 1 - Removing The Spool; Step 2 - Replace The Cutting Line - Qualcast GGT450A1 Assembly Manual

How To Replace The Spool/Spool Line

Step 1 – Removing The Spool
O
B
To remove the cap
Press and hold in the two latches (A.B).
P
Pull cap away from the spool holder.
Do not lose the spring
To fit spool and line complete:
Remove old spool.
Place new spool into cutting head. Release one line from cleat and feed line through eyelet.
Repeat for second line.
Refit the cap.
Step 2 – Replace The Cutting Line
Warning! Your Trimmer is designed to use only line with a maximum diameter of 1.65 mm
IMPORTANT - Always wind the line onto the upper section of the spool first.
P
A
a
Customer Helpline 0344 801 0979
ORIGINAL INSTRUCTIONS
B
A
a
17