Yamaha CX-A5100 Owner's Manual page 130

■
CINEMA DSP 3D Mode
3
Enables/disables CINEMA DSP HD (p.70). If this function is set to "On", CINEMA DSP
3
HD functions with the selected sound programs (except 2ch Stereo and 11ch Stereo).
Settings
Off
Disables CINEMA DSP HD
On
Enables CINEMA DSP HD
■
Virtual Presence Speaker
Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and
surround speakers. When VPS is enabled, the unit creates front VPS when no front
presence speakers are connected, and creates rear VPS when front presence
speakers are connected but no rear presence speakers (p.70).
Settings
Off Disables Virtual Presence Speaker (VPS).
On Enables Virtual Presence Speaker (VPS).
• Depending on the installation height of the surround speakers, VPS may not be effective. In this case, set
"Virtual Presence Speaker" to "Off".
■
Virtual Surround Back Speaker
Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround
speakers. When VSBS is enabled, the unit creates VSBS when no surround back
speakers are connected.
Settings
Off Disables Virtual Surround Back Speaker (VSBS).
On Enables Virtual Surround Back Speaker (VSBS).
• VSBS is effective only when 6.1- or 7.1-channel content is played back.
3
.
3
.
En
■
DAC Digital Filter
Selects the digital filter type of the audio DAC (digital-to-analog converter) to have
favorite sounds.
Settings
Removes out-of-band noises by the filter with steep attenuation
Sharp Roll-off Type characteristics.
It has a tendency to produce clear sounds.
Removes out-of-band noises by the filter with gentle attenuation
Slow Roll-off Type characteristics.
It has a tendency to produce soft sounds.
Reduces the audio delay caused by the DAC internal digital filter.
Short Latency Type
It has a tendency to produce responsive and rhythmical sounds.
■
Object Decode Mode
Enables/disables playback of object-based audio signals such as Dolby Atmos
contents.
Settings
Disables playback of object-based audio signals. Those signals will be
Disable
played in normal 5.1-/7.1-channel audio.
Enable Enables playback of object-based audio signals.
130