Mitsubishi Electric PAC-YT34STA Instruction Book page 23

4. Searching for registered units
The address numbers of all units registered in a group can be checked.
(1) Using step 1, select the group to be searched.
(2) The address numbers of the registered units will appear in order of smallest number each time
the switch is pressed.
PROHIBIT
Press
Press
Press
(For SC, if registered in another group, the pattern No. section attributes will flicker.)
(3) If a single unit is not registered, "---" will display.
5. Deleting a unit from a group
(1) Using steps 1 and 2, call out the address No. of the unit to be deleted.
• When the
CLEAR
deleted.
switch once.
PROHIBIT
switch once.
PROHIBIT
switch once.
PROHIBIT
switch is pressed twice in this state, the unit registered in the group will be
Press switch twice.
CLEAR
The attribute display will
disappear and "--"will be
displayed when correctly
completed.
23