Download  Print this page

Mitsubishi Electric PAC-YT34STA Instruction Book Page 3

Air conditioning control system.
Hide thumbs

Advertisement

WARNING
Unit must not be installed by user.
Always contact your dealer or a specialist to install the unit. Improper installation by the user could result in
electric shocks or fires, etc.
Check the installation state.
Always check that the unit is installed on a solid place where it will not fall off.
Check the rated power supply.
An incorrect power supply could result in fires or unit trouble.
Stop immediately when error occurs.
Continuing operation in an erroneous state could result in trouble, electric shocks or fires, etc. If any
abnormality is sensed (burning smell, etc.), always stop the operation, turn the power switch OFF, and
contact your dealer.
Unit must not be moved and re-installed by user.
Improper installation by the user could result in electric shocks or fires, etc.
Always contact your dealer or a specialist when the unit must be moved.
Unit must not be disposed by user.
Contact your dealer when the unit must be disposed of.
Never modify or repair the unit.
Improper modifications or repairs could result in electric shocks or fires, etc. Always consult your dealer for
repairs.
Stop operation if operation is inhibited with an error display or if a fault occurs.
Continuing operation could result in fires or faults.
Contact your dealer.
CAUTION
Do not place hazardous objects near unit.
Do not install this unit where flammable gases could leak. If flammable gases leak and accumulate around
the unit, fires or explosions could result.
Do not wash this unit with water.
Washing the unit with water could result in electric shocks or faults.
Do not operate switches with wet hands.
Touching the controller with wet hands could result in electric shocks or faults.
Do not use for special applications.
This product is intended for use with the Mitsubishi Electric building air conditioning control system. Do not
use for the control of other air conditioners or for other applications.
Failure to observe this could result in malfunctioning.
Do not spray insecticide or flammable sprays onto unit.
Do not place flammable sprays, etc., near the unit or spray these directly onto the unit.
Doing so could result in fires or explosions.
Do not use in special environments.
Using this product in environments containing a high level of oil (including machine oil), vapours or sulphuric
gases, etc., could result in a drop in performance or damage of parts.
Do not press switches with pointed objects.
Pressing with pointed objects could result in electric shocks or faults.
Observe the working temperature range.
Always observe the working temperature range. Serious faults could result if the unit is used outside the
working temperature range.
Refer to the specifications in the instruction manual for the working temperature range.
If not indicated in the instruction manual, the range is 0ºC to 40ºC (32ºC to 104ºF).
Do not pull or twist the transmission cables
Doing so could result in fires or faults.
Do not disassemble this unit.
Touching the internal PCBs, etc., is hazardous, and could result in fires or faults.
Do not wipe this unit with benzene, thinner or chemical rags.
Using these matters could result in discoloration or faults. If the unit is heavily dirtied, wipe off with a cloth
wetted in diluted neutral detergent, and then wipe again with a dry cloth.
3

Advertisement

Table of Contents

   Also See for Mitsubishi Electric PAC-YT34STA

   Related Manuals for Mitsubishi Electric PAC-YT34STA

Comments to this Manuals

Symbols: 0
Latest comments: