7-1-3. Collective deletion
• All group setting information and interlocked unit setting information can be deleted.
This function is valid only when this controller is the master.
(1) Display the Group Setting Screen or Interlocked Unit Setting Screen.
(2) All set information will be deleted when the
seconds in this state.
During collective deletion communication
8. Setting the functions
Function setting switch
8-1. Using with master system controller
• When connecting multiple system controllers, the system controller with many functions is
designated as the "master", and the system controller with few functions is designated as the
"slave". The "master/slave" functions of the system controller used together are as follows.
The functions have a priority in order of G-50A (MJ-103MTR-A) > PAC-SF44 SRA > PAC-YT34STA > PAC-YT40ANRA > PAC-SC30GRA > LMAP02-E.
The COLLECTIVE ON/OFF lamp flickers, and "88", "888" and
"88" flicker at the group No. display section, the operation No.
display section and operation time display section respectively.
"H0" flickers at the pattern No. display section
switch is held down for three or more
Remote controller main unit