Introduction To Buttons On Remote Controller - Daikin FTXV25AV1B Owner's Manual

Introduction to buttons on remote controller

Note:
● After putting through power, the air conditioner will give out a sound and operation
indicator " " is ON (red indicator). You can operate the air conditioner through
the remote controller.
● At ON status, after pressing a button on the remote controller, the signal icon " "
on the remote controller will flash once. The air conditioner will give out a sound,
which indicates the signal has been sent to the air conditioner.
● At OFF status, display screen on the remote controller displays the set
temperature. At ON status, display screen on the remote controller displays the
corresponding startup function icon.
1
ON/OFF button
Press this button to turn on or turn off the air conditioner. After turning on the unit,
the operation indicator "
different for different models) and indoor unit gives out a sound.
2
MODE button
Press this button to select your required operation mode.
● After selecting auto mode, the air conditioner will operate automatically according
to ambient temperature. The set temperature can't be adjusted and also can't be
displayed. Press the "FAN" button to adjust fan speed. Press the "SWING" button
to adjust swing angle.
● After selecting the cool mode, the air conditioner operates under cool mode. The
cool indicator "
to adjust the set temperature. Press the "FAN" button to adjust fan speed. Press
the "SWING" button to adjust the swing angle.
● After selecting the dry mode, the air conditioner operates under dry mode at low
speed. The dry indicator "
can't be adjusted. Press the "SWING" to adjust the swing angle.
● After selecting the fan mode, the air conditioner operates only under fan mode,
the other mode indicators on indoor unit are OFF. Press the "FAN" button to
adjust fan speed. Press the "SWING" button to adjust the swing angle.
● After selecting the heat mode, the air conditioner operates under heat mode. The
heat indicator "
to adjust the set temperature. Press the "FAN" button to adjust fan speed. Press
the "SWING" button to adjust the swing angle. (Cooling only unit can't receive the
signal for heating mode.)
" on the indoor unit is ON (blue indicator. Color may be
" on the indoor unit is ON. You can press the "+" or "-" buttons
" on the indoor unit is ON. Under dry mode, fan speed
" on the indoor unit is ON. You can press the "+" or "-" buttons
20