Installation Of Your Morsø Stove; Checking Loose Parts In The Stove - Morso 3600 Installation And Operating Instructions Manual

1.0 Installation of your Morsø stove
Installation of woodburning stoves must be safe and legal.
If your Morsø stove is not installed correctly, it may cause a house fire. To reduce the risk
of fire, the installation instructions must be followed carefully. Contact the local building
officials about restrictions and installation inspection in your area.
Before you start installing your stove, make sure that:
- The stove and chimney connection are placed far enough from combustible materials to
meet all clearance requirements.
- The floor protection must be adequate and must be made correctly according to ´the
requirements.
All neccessary approvals are needed from the local building officials.
The data plate, which is located on the back of the stove, provides information regarding safety
testing information, name of certified testing laboratory, and installation requirements.
Installation requirements vary in different districts, and the local building officials have the final
authorization to approve your installation. You should discuss the installation with them before
beginning. Please ask your dealer for further information.
Do not connect to any air distribution duct or system.
Important: If the installation instructions are not followed carefully, it may cause dan-
gerous situations like chimney - and house fires. Follow the instructions carefully and
do not deviate from them as it may cause injuries to people or property.
1.1 Unpacking the stove
After removing the outer packaging, flatten it and lay onto the floor close to the stove; this
can then act as protective work surface during the assembly process.
Next, remove the legs and bolts from inside the stove. Gently lay the stove onto its back. Using
the bolts supplied, now screw the legs into position on the underside of the base. The stove
should now be lifted and moved into the upright position, avoiding excess load on the back legs.
The stove is heavy and therefore it is strongly recommended that when lifting, it is under-
taken by two people. Morsø 3610 weighs 199 kg. Morsø 3640 weighs 209 kg.

1.2 Checking loose parts in the stove

After unpacking, check that the fire bricks are firmly in position and have not shifted in tran-
sit. Check also that the air control works freely.
Standard Accessories
Poker, ceramic flue connection gasket and ash pan tools are standard accessories, and can
usually be found in the ashpan or firebox area.
4