Morso 3112 Installation Instructions
Air kit set
Hide thumbs
Also See for 3112:
- Installation and operation instructions manual (24 pages) ,
- Instructions for installation and use manual (16 pages) ,
- Installation and operating instructions manual (11 pages)
Advertisement
Available languages
Available languages
Table of Contents
Installation Instructions
Air kit set Morsø 3112/3142/3600/7110
Kit Contens:
(1) Air duct adaptor
(2) 3,5 X 6,5 mm sheet metal screws
Installation:
1. Place adaptor flange against the shield aligning the three pre-drilled holes of
the flange to the holes on the shield.
2. Install the three sheet metal screws securing the flange to the shield.
3. Installation is now complete. You may now connect your air duct to the stove.
Floor to center of the air collar:
Morsø 3600:
Morsø 7100 - 206 mm legs:
Morsø 7100 - 276 mm legs:
Morsø 3112:
Morsø 3142:
If you have any further questions, please contact your authorized Morsø dealer.
MORSØ JERNSTØBERI A/S . DK-7900 NYKØBING MORS
E-Mail: stoves@morsoe.com · Website: www.morsoe.com
322 mm (12,7 inch)
324,5 mm (12,8 inch)
394,5 mm (15,5 inch)
317 mm (12,5 inch)
368 mm (14,5 inch)
1
Advertisement
Table of Contents
Related Manuals for Morso 3112
Summary of Contents for Morso 3112
- Page 1 Installation Instructions Air kit set Morsø 3112/3142/3600/7110 Kit Contens: (1) Air duct adaptor (2) 3,5 X 6,5 mm sheet metal screws Installation: 1. Place adaptor flange against the shield aligning the three pre-drilled holes of the flange to the holes on the shield.
- Page 2 Montageanleitung – Stutzen für Aussenluftzufuhr Morsø 3112/3142/3600/7110 Inhalt: 1) Stutzen 2) 3x5 x 6x5 mm Schrauben Montage: 1) Den Stutzen gegen die Rückplatte halten, so dass die drei Löcher im Stutzen zu den 3 Löchern in der Rückplatte passen 2) Den Stutzen zur Rückplatte mit den 3 Schrauben befestigen 3) Das Rohr für Luftzufuhr kann jetzt zum Ofen angeschlossen werden...
- Page 3 Monteringsvejledning Studs for airtight Morsø 3112/3142/3600/7110 Indhold: (1) Studs (2) 3,5 X 6,5 mm pladeskruer Montering: 1. Hold studsen imod bagpladen, så de tre huller i studsen passer med de 3 huller i bagpladen. 2. Monter studsen fast til bagpladen med de 3 pladeskruer.
- Page 4 Instructions de montage Conduits airtight Morsø 3112/3142/3600/7110 Contenu : (1) Conduits (2) Vis 3,5 X 6,5 mm pour garniture Montage 1. Maintenir le conduit contre la garniture arrière en faisant correspondre les trois orifices du conduit aux trois orifices de la garniture arrière.
Need help?
Do you have a question about the 3112 and is the answer not in the manual?
Questions and answers