Network Connection - Sony BDV-E3200 Operating Instructions Manual

Network connection

The system cannot connect to the
network.
t Check the network connection
(page 19) and the network settings
(page 46).
Wireless LAN connection
You cannot connect your PC to the
Internet after [Wi-Fi Protected Setup
(WPS)] is performed.
t The wireless settings of the router
may change automatically if you
use the Wi-Fi Protected Setup
function before adjusting the
settings of the router. In this case,
change the wireless settings of your
PC accordingly.
The system cannot connect to the
network or the network connection is
unstable.
t Check if the wireless LAN router is
on.
t Check the network connection
(page 19) and the network settings
(page 46).
t Depending on the usage
environment, including the wall
material, radio wave reception
conditions, or obstacles between
the system and the wireless LAN
router, the possible communication
distance may be shortened. Move
the system and the wireless LAN
router closer to each other.
t Devices that use a 2.4 GHz
frequency band, such as a
microwave, BLUETOOTH, or digital
cordless device, may interrupt
communication. Move the unit
away from such devices, or turn off
such devices.
t The wireless LAN connection may
be unstable depending on the
usage environment, especially
while using the BLUETOOTH
function of the system. In this case,
adjust the usage environment.
The wireless router you want is not
shown in the wireless network list.
t Press RETURN to return to the
previous screen, and try [Wireless
Setup(built-in)] again. If the wireless
router you want is still not detected,
select [Add a new address.] from
the network list, then select [Manual
registration] to input a network
name (SSID) manually.
BLUETOOTH device
Pairing cannot be done.
t Move the BLUETOOTH device closer
to the unit.
t Pairing may not be possible if other
BLUETOOTH devices are present
around the unit. In this case, turn off
the other BLUETOOTH devices.
t Delete the system from your
BLUETOOTH device and perform
pairing again (page 26).
Connecting cannot be done.
t The pairing registration information
has been erased. Perform the
pairing operation again (page 26).
There is no sound.
t Make sure this unit is not too far
from the BLUETOOTH device, or this
system is not receiving interference
from a Wi-Fi network, other 2.4 GHz
wireless device, or microwave oven.
t Check that the BLUETOOTH
connection is made properly
between this unit and the
BLUETOOTH device.
t Pair this system and the
BLUETOOTH device again.
55
GB