Connecting the antenna
(aerial)
FM wire antenna (aerial)
(supplied)
Note
• Be sure to fully extend the FM wire antenna
(aerial).
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
GB
18
Step 3: Preparing for
Network Connection
Tip
To connect the system to your network, perform
[Easy Network Settings]. For details, see "Step 4:
Performing the Easy Setup" (page 20).
Select the method based on your LAN
(Local Area Network) environment.
• If you use a wireless LAN
The system has built-in Wi-Fi, and you
can connect the system to the network by
making the network settings.
• If you use other than a wireless LAN
Use a LAN cable to connect to the LAN
(100) terminal on the unit.
Broadband router
LAN cable (not supplied)
Tip
A shielded interface cable (LAN cable), straight
or crossover, is recommended.