Easy Setup; Easy Network Settings; Remote Start; Network Connection Status - Sony HT-RT5 Operating Instructions Manual

Tip
• For further details, visit the following
website and check the FAQ:
www.sony.eu/support
 [Network Connection Status]
Displays the current network connection
status.
 [Network Connection Diagnostics]
You can run the network diagnostic to
check if the network connection has been
made properly.
 [Screen mirroring RF Setting]
If you use multiple wireless systems, such
as a wireless LAN, the wireless signals
may be unstable. In this case, playback
stability may be improved by setting the
priority radio frequency channel for
Screen mirroring.
[Auto]: Normally select this. The system
automatically selects the best channel for
Screen mirroring.
[CH 1]/[CH 6]/[CH 11]: The selected
channel is prioritized for Screen mirroring
connection.
 [Connection Server Settings]
Sets whether or not to display the
connected home network server.
 [Auto Renderer Access Permission]
[On]: Allows automatic access from a
newly detected home network controller.
[Off]: Off
 [Renderer Access Control]
Displays a list of home network controller-
compatible products and sets whether or
not to accept commands from the
controllers in the list.
 [External Control]
[On]: Allows the home automation
controller to operate this system.
[Off]: Off
 [Remote Start]
[On]: Allows you to turn on the system by
a device linked via a network when the
system is in standby mode.
[Off]: The system cannot be turned on by
a device linked via a network.

[Input Skip Setting]

The skip setting is a convenient feature
that allows you to skip unused inputs
when selecting a function by pressing
INPUT.
[Do not skip]: The system does not skip
the selected input.
[Skip]: The system skips the selected
input.
Note
• When you press INPUT during the home
menu is displayed, input icon appears
dimmed if it has been set to [Skip].

[Easy Setup]

Run [Easy Setup] to make the basic initial
settings and the basic network settings
for the system. Follow the on-screen
instructions.

[Easy Network Settings]

Runs [Easy Network Settings] to make the
basic network settings. Follow the on-
screen instructions.
[Resetting]
 [Reset to Factory Default Settings]
You can reset the system settings to the
factory default by selecting the group of
settings. All the settings within the group
will be reset.
29
GB