Connecting The Antenna (Aerial); Step 3: Preparing For Network Connection - Sony BDV-E690 Operating Instructions Manual

Connecting the antenna
(aerial)
Rear panel of the unit
L
OUT ARC
R
LAN (100)
VIDEO OUT AUDIO IN
FM wire antenna (aerial)
(supplied)
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep
it as horizontal as possible.
• If you have poor FM reception, use a 75-ohm coaxial
cable (not supplied) to connect the unit to an outdoor
FM antenna (aerial).
FM COAXIAL
75
ANTENNA
or
Step 3: Preparing for
Network Connection
• To connect the system to your network, perform
[Easy Network Settings]. For details, see "Step 4:
Performing the Easy Setup" (page 21).
Select the method based on your LAN (Local
Area Network) environment.
Front panel of the unit
1
Broadband
router
LAN
LAN cable
(not supplied)
DIGITAL IN
OPTICAL
OUT ARC
LAN (100)
TV VIDEO OUT
Rear panel of the unit
1 Wired Setup
Use a LAN cable to connect to the LAN (100)
terminal on the unit.
• A shielded interface cable (LAN cable), straight or
crossover, is recommended.
2 USB Wireless Setup
Use a wireless LAN via the USB Wireless LAN
Adapter (Sony UWA-BR100* only).
The USB Wireless LAN Adapter may not be
available in some regions/countries.
* As of November 2011.
FUNCTION
2
USB Wireless LAN
Adapter
(not supplied)
L
R
FM COAXIAL
75
AUDIO IN ANTENNA
19
GB