SECTION 11—REGULATOR
DETAIL "A" - REGULATORS AFTER
07/01/12 (SENSORED) AND 09/01/12
(NON-SENSORED)
Perfecto
™
2
Pressure
Regulator (Top)
Pressure
Regulator
Mounting
Screws
Product
Tank
NOTE: For adjusting the regulator there is no need to remove
the control panel.
NOTE: Regulator shown was used before 07/01/12 for
sensored concentrators and before 09/01/12 for non-sensored
concentrators.
FIGURE 11.1 Replacing Regulator
56
Pressure
Adjustment Screw
(5/32-inch Allen
Wrench)
Pressure
Sensor Tubing
Location of Product Tank
Part No 1154245