MAINTENANCE ON CHASSIS AND ENGINE
Warning
Danger of accidents Do not make any radical changes to the adjustment of the shock absorbers.
–
Make adjustments in small steps only.
Info
Increasing the spring preload raises the center of gravity of the vehicle. This can have a large impact on vehicle handling.
Tip
Before changing the spring preload, make a note of the present setting, e.g., by measuring the length of the spring.
–
Remove the rear shock absorber.
–
After removing the shock absorber, clean it thoroughly.
–
Loosen lock ring
from an authorized KTM workshop.
Hook wrench (83019002000)
–
Turn the adjusting ring until the spring pack is fully unloaded.
200601-01
x
(
p. 78)
. Hold adjusting ring
while doing so. Suitable tools are available
77