Table of Contents
Advertisement
Front View (Inside of the door)
SPLIT/
SEQUENCE
ZOOM
0
POWER
TIMER
23 24
17. WARNING RESET button
This button is used to clear on-screen warning dis-
play data.
18. SET UP button
Press this button to display the <SETTINGS> menu.
19. SEARCH button
Press this button to display the <SEARCH > menu.
20. COPY button
Press this button to display <COPY> menu. This
button lights when performing copy operation. Cop-
ies cannot be made when the copy device is not con-
nected or a card is not in the COMPACT FLASH slot.
21. ALARM INTERRUPT button
When pressing this button, the unit will not accept
alarm signals or motion detection for 5 minutes. Dur-
ing this time, the button will flash. This allows device
set-up changes to be made without being disturbed
by ALARMS. Press this button once again to cancel.
22. PLAY DEVICE button
Press this button to select PLAYBACK device.
23. POWER button
Pressing this button while the MAIN switch is on the
rear of the unit is set to ON, the power turns on and
the button lights. When the button is pressed again,
the unit will be in stand-by and the light will turn off.
When the unit is in operational transition such as
booting, the button will flash and other operations
are not accepted.
24. TIMER button
When pressing this button, the unit is set to timer
recording/stand-by and the TIMER indicator lights.
When pressing this button for more than 1 second,
timer recording/stand-by is cancelled and the TIMER
indicator turns off.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Beginning
DIGITAL RECORDER DX - TL 2500
OUTPUT B
TIMER
PRE ALARM
M-DET
EMERGENCY
VIDEO OUT AUDIO OUT
COMPACT FLASH
25
26
17 18 19
20
10
11
12
13
ACCESS
COM
LOCK
WARNING
SET UP
SEARCH
COPY
RESET
MENU
CFC
OUTPUT A
OUTPUT B
MULTIPLEXER
27
28
25. ANALOGUE OUT connectors
VIDEO OUT connector
Output connector for video signal (RCA pin).
AUDIO OUT connector
Output connector for audio signal (RCA pin).
26. COMPACT FLASH slot
Compact Flash Card can be used for saving/loading
data and menu information. When not using the slot,
attach the COMPACT FLASH slot cover to prevent
dust from entering the unit.
27. CFC (Compact Flash Card) indicator
Illuminates only when the CFC is selected by press-
ing the PLAY DEVICE button.
28. MULTIPLEXER buttons
OUTPUT A button
When this button is pressed, the video of the cam-
era is sent to OUTPUT A. Operations of the camera
number buttons and the SPLIT/SEQUENCE button
affects and reflects OUTPUT A.
OUTPUT B button
When this button is pressed, operation of the cam-
era number buttons and the SPLIT/SEQUENCE but-
ton switches the image to OUTPUT B. Please note
that OUTPUT B is for live images only. Playback of
recorded image is only for OUTPUT A.
To display image of the monitor connected to OUT-
PUT B, set OUTPUT B to "ON" in the setting of the
"OUTPUT B ON/OFF" of the <MPX DISPLAY SET-
TINGS> screen.
21
22
CLEAR/
REW
14
15
16
PAUSE/
STOP
REV. PLAY( )
SHUTTLE HOLD
MAIN
ALARM
PLA
PLAY DEVICE
Y DEVICE
INTERRUPT
EJECT
ARCHIVE
COPY
29
30
31
see page 42.
ENTER/
FF
REC/STOP
ARCHIVE
PLAY( )
15
Advertisement
Table of Contents
