Major Operations And Their Functions; Front View - Mitsubishi Electric DX-TL2500U Installation And Operation Manual

Mitsubishi digital electronics dvr user manual
Table of Contents

Advertisement

Major operations and their functions

Front View

1
2
SPLIT/
SEQUENCE
ZOOM
0
1. ZOOM button
Pressing this button once during single screen dis-
play, the screen is magnified by 100%. In the same
way, pressing the button twice magnifies the screen
by 200% and pressing the button three times magni-
fies the screen by 400%. Pressing a camera number
button (1, 2, 3, or 4) will move the magnification center
point.
2. SPLIT/SEQUENCE button
Press the button to display SPLIT16, SPLIT9, SPLIT4
screen or SEQUENCE screen setting on multiplexer
functions.
3. Camera number buttons (1 to 16)
Press the button to display the image from the cam-
era connected to the input.
4. SHUTTLE ring
Used to set various menus and search functions,
adjusting the playback speed, and rewinding or for-
warding the recording images.
5. JOG dial
Used to set various menus and search functions,
forwarding or rewinding the image during playback
(field-by-field).
6. REC/STOP button
Press this button once to start recording. To stop
recording, press this button again for about two sec-
onds. When the unit is in Timer recording the REC/
STOP button has no affect until Timer recording is
exited.
7. ARCHIVE button
Press the button to archive. When the button pressed
for more than 1second, archive stops. The unit will
not start to archive if an archive device is not con-
nected.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
14
DIGITAL RECORDER DX - TL 2500
OUTPUT B
TIMER
PRE ALARM
M-DET
EMERGENCY
ACCESS
8
9
10
11
12
3
10
11
12
13
COM
LOCK
13
14 15 16
8. OUTPUT B indicator
Illuminates when pressing the OUTPUT B button.
9. TIMER indicator
Illuminates during timer recording or when timer re-
cording is in stand-by.
10. PRE ALARM indicator
Illuminates when in pre-alarm recording mode.
11. M-DET indicator
Illuminates when the motion detection function is on.
12. EMERGENCY indicator
Flashes during emergency recording and lights when
recording is completed.
13. ACCESS indicator
Illuminates during access to hard disk drive, Com-
pact Flash Card or peripheral recording devices.
14. COM (COMMUNICATION) indicator
Illuminates when establishing communication with
personal computer.
15. LOCK button
Pressing it with a pointed object (such as a ballpoint
pen) while the MAIN switch (main power) on the rear
of the unit is on, will activate the simple lock or pass-
word lock. Moreover, the PASSWORD can be set on
the <PASSWORD SETTING> screen. The indicator
will light while the lock is active.
16. LOCK indicator
Illuminates when simple lock or password lock is on.
4
5
CLEAR/
REW
14
15
16
6
7
ENTER/
FF
REC/STOP
ARCHIVE

Advertisement

Table of Contents
loading

Table of Contents