Table of Contents
Advertisement
<INITIAL SET UP/INFORMATION> (continued)
1. Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } Select "IM-CHECK PLAY" in the <HDD
SETTINGS> screen. Display the desired setting and confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
3. Select the device for alteration check and then start playback.
Warning will also be displayed for parts where
recorded data is damaged.
IMAGE MODIFIED(
When performing complex playback operations
with the SHUTTLE ring (one picture at a time), dur-
ing alteration check, the "IMAGE MODIFIED" warn-
ing may appear. Use the DVR's normal playback
mode if this occurs.
SEQUENTIAL PLAY
It is possible to make a copy of the recorded video to an
analogue video recorder, etc.. This function is done play-
ing back the video of each camera in their REC order in full
screen. During single screen sequential playback, the
SPLIT/SEQUENCE button will light. Use REV. PLAY to slow
playback.
<HDD SETTINGS>
HDD REPEAT REC MAIN
HDD REPEAT REC SUB
HDD REPEAT PLAY
IM-CHECK PLAY
>> SEQUENTIAL PLAY
#1
FIFO OVERWRITE MODE
#2
ARCHIVE SOURCE HDD
#1
ARCHIVE START POSITION RESET
#1.Appears when "ARCHIVE•COPY" is set to
ID4•ID5 on the screen.
#2.Appears when "PARTITION" is set and
"ARCHIVE•COPY" is set to ID4•ID5 respectively
on the screen.
Setting ( default : "OFF" )
"ON" : Plays back the video in the single screen se-
quential mode.
"OFF" : Does not play back the video in the single
screen sequential mode.
Playback is performed during camera sequen-
tial play at an interval of 30P. To change the play-
back interval, press the PLAY button (or the REV.
PLAY button)(
pages 73, 74).
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
54
1
2 3
)
ON
OFF
OFF
OFF
OFF
OFF
MAIN
see "Changing playback intervals,
1. Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } Select "SEQUENTIAL PLAY" in the
<HDD SETTINGS> screen. Display the desired setting and
confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
3. Press the PLAY button.
4. Press one of the camera number buttons with recorded
video.
• Single screen sequential playback starts.
When performing camera sequential playback
for video with long recording intervals, the video of
the largest camera number selected for recording
will be played back the longest.
Only the camera number (title) of the pressed
camera number button is displayed. Other camera
number (titles) will not be displayed. If display is not
necessary, select "NONE" in the <CAMERA DIS-
PLAY> (
see page 37).
ARCHIVE
FIFO OVERWRITE MODE
This function can be set to make repeated archive while
deleting parts of previous data in HDD for recording con-
nected to ID4.
<HDD SETTINGS>
HDD REPEAT REC MAIN
HDD REPEAT REC SUB
HDD REPEAT PLAY
IM-CHECK PLAY
SEQUENTIAL PLAY
>>FIFO OVERWRITE MODE
ARCHIVE SOURCE HDD
ARCHIVE START POSITION RESET
This setting appears when "ARCHIVE• COPY"
is selected on "ID4•ID5" of the <INITIALIZATION>
screen, and HDD for recording is connected to ID4.
Confirm that the ARCHIVE device is correctly
connected to ID4 before making FIFO OVERWRITE
MODE settings.
Settings ( default : "OFF" )
"ON" : Perform repeated archive to HDD connected
to ID4.
"OFF" : Do not perform repeated archive to HDD
connected to ID4.
1. Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } Select "FIFO OVERWRITE MODE" in
the <HDD SETTINGS> screen.
2. Turn the SHUTTLE ring clockwise twice when the cursor is
on the left next to "FIFO OVERWRITE MODE".
• The first turn inverts the "OFF" setting display, and the
second makes it flash with a red background.
ON
OFF
OFF
OFF
OFF
OFF
MAIN
Advertisement
Table of Contents
