Table of Contents
Advertisement
User's Manual
Appendix I ─ Specifications
Signal Format
Video Input
Monitor Outputs
Video Resolution
Playback/Record Speed
(images per second)
Alarm Input
Alarm Output
Alarm Reset Input
Internal Buzzer
Network Connectivity
Audio Input
Audio Output
Text Input
Video Input
Video Loop
Monitor Output
Audio In
Audio Out
Alarm Input/Output
Ethernet Port
RS232C Serial Port
RS485 Serial Port
USB Port
Primary Storage
Secondary Storage*
* When installing an internal DVD RW drive, connect the SATA I/O cable to the SATA3 socket.
76
NTSC or PAL (Auto Detect)
Composite: 8 or 16 looping inputs, 1 Vp-p, auto-terminating, 75 Ohms
Composite: 1 BNC, 1 Vp-p, 75 Ohms
Spot: 1 BNC, 1 Vp-p, 75 Ohms
VGA: 1
Composite: 720x480 (NTSC), 720x576 (PAL)
VGA: 800x600 @ 60Hz
120/120ips (NTSC), 100/100ips (PAL)
INPUTS/OUTPUTS
8 or 16 terminal, programmable as NC or NO, 2.4V (NC) or 0.3V (NO)
threshold, 3.3VDC
1 relay output, terminal blocks, programmable as NC or NO, 2A@125VAC,
1A@30VDC
1 TTL, terminal block
80dB at 10cm
10/100 Mbps Ethernet (RJ-45)
RCA Input: 4, Line In
RCA Output: 1, Line Out
POS Interface, ATM Interface
CONNECTORS
Composite: 8 or 16 BNC
Composite: 8 or 16 BNC (Auto Terminating)
Composite: 1 BNC
VGA: 1 VGA
Spot (Composite): 1 BNC
4 RCA connector
1 RCA connector
Terminal blocks
RJ-45
DB9 (P)
Two-connector terminal block
2 (USB 2.0)
STORAGE
SATA hard disk drive (up to 2)
Built-in DVD RW drive
USB hard disk drive or flash drive
Specifications are subject to change without notice.
VIDEO
Advertisement
Table of Contents
