Figure 9 ─ Monitoring Setup Screen - Mitsubishi Electric DX-TL16U User Manual

Mitsubishi electronics dvr user manual

Hide thumbs Also See for DX-TL16U:

Table of Contents

User's Manual

Highlight the box beside Format for the desired storage device and press

the

button. You will be able to format the device for recording. When

selecting Not Using from Use As and highlighting the Format button, the

device will not be used for recording. Selecting Close and pressing the

button exits the screen. You can also set aside space to store temporary files

for CD or DVD burning by selecting Partition – CD/DVD Burn.

The box beside Recorded Data – From / To displays the time information of recorded data. Highlighting

Clear All Data... and pressing the

wish to clear all data before the DVR erases the video data. Clear All Data... will not clear the System Log.

You can save your Storage changes by highlighting Save and pressing the

exits the screen without saving the changes.

Monitoring Settings (SYSTEM  Monitoring Tab)

The DVR can be configured to run self-diagnostics and report the results, and also can be set to react to

system events.

Highlighting the Settings box beside System and pressing the

that you want the DVR to run self-diagnostics on the system. You can select from 1 hr. to 30 days or Never.

Highlighting the Settings box beside Check Recording and pressing the

Recording setup screen.

button will clear all video data. You will be asked to verify that you

Figure 9 ─ Monitoring setup screen.

Highlighting Schedule On and pressing the

and Off. When set to On, you can select the day, time range and

interval that you want the DVR to run self-diagnostics on the recorder.

The Interval can be selectable from 1 min. to 7 days or Off. The

box allows you to delete a check recording schedule.

button. Selecting Cancel

button allows you to select the interval

button displays the Check

button toggles On

Table of Contents

Dx-tl8u