Table of Contents
Advertisement
Caution and care
HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR)
NEVER REMOVE THE TOP COVER AND TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT
Touching the inside of the cabinet or inserting foreign objects of any kind through the disc loading slot or ventilation holes not only creates
a safety hazard but can also cause extensive damage.
PROTECT THE POWER CORD
Damage to the power cord may cause fire or electrical shock. If the power cord is damaged, turn OFF the MAIN switch and carefully replace
it with a new power cord.
Do not move this product with the power-on as the built-in HDD may be damaged. If you need to move the product, turn the unit OFF and
disconnect power from the unit. Confirm that more than one minute has passed since the power cord and the connecting cords were disconnected,
then move this unit. Make sure to take the disc out and close the disc loading slot.
UNPLUG THE POWER CORD DURING A LONG ABSENCE
Turn off the power and unplug the power cord during a long absence.
MAINTAIN GOOD VENTILATION
Do not obstruct the many ventilation holes on the unit. For maximum ventilation, leave some space around the unit and place the unit on
a hard level surface only, and ensure it is not covered during use. Heavy objects should never be placed on the unit.
WHEN NOT IN USE
When not in use, always eject the disc and turn OFF the MAIN switch.
CABINET CARE
Never use petroleum-based cleaners. Clean with a soft cloth moistened with soap and water and wipe dry.
PVC cables or leads should not be left in contact with the cabinet surface for long periods.
INSTALLATION LOCATION
For excellent performance and lasting reliability install in a location that is:-
1. Well ventilated, out of direct sunlight and away from direct heat.
2. A solid vibration-free surface.
3. Free from high humidity, excessive dust and away from magnetic fields.
4. Please ensure that the ventilation fan located on the unit's back panel is not blocked.
UNSUITABLE LOCATIONS
Placing the unit in the following places might shorten the product life:
Extremely cold places, such as refrigerated warehouses and ice houses
Places where excessive hydrogen sulfide is likely to be generated, such as hot-springs areas
Places or locations with salt air environment.
NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
DO NOT PLACE HEAVY OBJECT ON THIS UNIT.
DO NOT STEP ONTO THIS UNIT.
DO NOT PLACE ANY OBJECTS IN FRONT OF THE DISC LOADING SLOT.
The unit may drop or fall by losing its balance. It may cause injury or failure of the unit.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
THIS APPARATUS MUST BE GROUNDED.
WARNING:
The supplied power cord is used for 120 V only. Never connect to any outlet or power supply having a different voltage or
frequency.
Notice about construction of the surveillance system using this unit
This unit can be controlled by the external devices via RS-232C terminal or NETWORK terminal. This unit can also be used to control
external devices via external terminal, or RS-232C terminal. Owning to these functions, this unit flexibly applies to the high grade
security system, but the whole surveillance system may be affected by the malfunction of this unit or the external devices depending
on the setting contents of this unit, the connection with the external devices,, or combination between this unit and the external devices.
When configuring a surveillance system using this unit, it is recommended to confirm first that this unit operates normally with the
other devices connected.
It is recommended to copy or back up the important recorded contents.
Damages rising out of any operational error of the surveillance system or loss of the recorded data or any other damages because
of any user malfunction of this unit are not covered.
Do not use the notification function of this unit for making critical judgment nor nay purpose related to human lives.
When this unit cannot recognize the external device which is being used for recording due to the power failure, decreased voltage,
or other failures, the recording point may be moved to the internal HDD of this unit or the other external HDD. To prevent occurrence
of such problem, it is recommended to use uninterruptible power supply.
If the power plug is disconnected or the breaker switch is turned off during recording, HDD may be damaged or playback of recorded
data may become impossible.
If the breaker switch is turned on and off everyday, set the timer recording to be performed only for the period that the breaker is on
and do not turn off the breaker during recording.
Digital Video Recorder
v
Advertisement
Table of Contents
