Figure 29 ─ Audio Setup Screen; Figure 30 ─ Alarm-Out Setup Screen - Mitsubishi Electric DX-TL16U User Manual

Mitsubishi electronics dvr user manual

Hide thumbs Also See for DX-TL16U:

Table of Contents

User's Manual

Audio Settings (DEVICE  Audio Tab)

Figure 29 ─ Audio setup screen.

The DVR can record up to four audio inputs. Highlight the box beside the input and press the

button.

A list of cameras appears, and you can select which camera you want associated with that audio input.

Highlight Enable Audio-Out and press the

button. This toggles between enabling and disabling audio

out.

NOTE: The DVR will NOT record audio when the recording speed is set to less than 1 ips.

You can save your Audio changes by highlighting Save and pressing the

button. Selecting Cancel exits

the screen without saving the changes.

Alarm-Out Settings (DEVICE  Alarm-Out Tab)

The Alarm-Out screen allows you to change the settings and establish a schedule for each alarm output

from the DVR.

Figure 30 ─ Alarm-Out setup screen.

Highlighting the box beside Dwell Time and pressing the

button allows you to set the dwell time of the

alarm output. Dwell times range from 5 seconds to 15 minutes.

You can add and edit alarm output schedules on this screen. Highlight the + and press the

button to add

a schedule. Highlighting the boxes under the Column heading and pressing the

button allows you to

edit the information in those boxes.

Table of Contents

Dx-tl8u