Table of Contents
Advertisement
User's Manual
Appendix C ─ WebGuard
WebGuard allows you to access a remote DVR, monitor live video images and search recorded video using
Internet Explorer web browser anytime from virtually anywhere.
Computer system requirements for using the WebGuard program are:
Operating System: Microsoft
CPU: Intel Pentium III (Celeron) 600MHz or faster
RAM: 128MB or higher
VGA: 8MB or higher (1024x768, 24bpp or higher)
Internet Explorer: Version 6.0 or later
Start Internet Explorer on your local PC. You can run the WebGuard program by entering the following
information in the address field.
"http://IP address:port number" (The DVR IP address and the WebGuard port number (default: 12088)
–
set in the Network setup screen (General tab))
Or, "http://DVRNS server address/DVR name" (The DVRNS server address and the DVR name registered
–
on the DVRNS server)
Or, "http://www.dvronline.net" (Entering the DVR IP address or the DVR name will be required when
–
logging in)
NOTE: WebGuard only works with Microsoft Internet Explorer and will NOT work with other browsers.
You will need to enter the DVR IP address in the DVR ADDRESS field when running the WebGuard
program by entering http://www.dvronline.net. Selecting the Enable DVRNS option allows you to enter
the DVR name registered on the DVRNS server instead of the IP address. You must enter the DVRNS server
address and port number in the SETUP setting when selecting the Enable DVRNS option.
NOTE: The port numbers for WATCH and SEARCH should be the same with port numbers for Remote
Watch and Remote Search set during Network setup.
NOTE: When running the updated WebGuard for the first time, Internet Explorer might occasionally
load the information of the previous version. In this case, delete the temporary internet files by
selecting Tools Internet Options General tab, and then run WebGuard again.
NOTE: There might be a problem that the bottom of WebGuard page is cropped due to the address
or status bars in Microsoft Internet Explorer 7.0. In this situation, it is recommended that websites
open windows without address or status bars by changing the internet setting. (Go to the Tools
Internet Options Security tab Click the Custom level... button Select Enable for the Allow
websites to open windows without address or status bars option)
66
®
®
Windows
2000, Microsoft
Select between the WEBWATCH (Web monitoring) and
WEBSEARCH (Web search) modes and enter the appropriate
port number of the program. Entering ID and PASSWORD
and clicking the [LOGIN] button logs in using the selected mode.
Selecting Save ID saves the ID you entered.
®
®
Windows
XP or Microsoft
®
®
Windows
Vista
Advertisement
Table of Contents
